GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

Caution: Refer to Brake Dust Caution in the Preface section.

  1. Release the park brake.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

  3. Object Number: 474301  Size: SH
  4. Loosen the park brake cable equalizer nut in order to remove the park brake right side cable from the park brake front cable.
  5. Remove the right rear park brake cable mounting bracket and nut.

  6. Object Number: 1721028  Size: SH
  7. Remove the park brake cable from the park brake actuator.
  8. Compress the locking ring and release the park brake cable from the bracket.

  9. Object Number: 651437  Size: SH
  10. Drill out the 2 rivets (1) retaining the park brake cable to the rear crossmember.

Installation Procedure


    Object Number: 1721028  Size: SH
  1. Install the park brake cable to the park brake actuator.
  2. Install the park brake cable to the park brake cable bracket.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Position the park brake cable mounting bracket to the wheel knuckle and install the nut.
  5. Tighten
    Tighten to 10 N·m (89 lb in).


    Object Number: 474301  Size: SH
  6. Install the park brake right side cable to the park brake equalizer and front cable.

  7. Object Number: 651437  Size: SH
  8. Secure the park brake cable to the rear crossmember with 2 rivets  (1).
  9. Adjust the park brake cable. Refer to Park Brake Adjustment .
  10. Lower the vehicle.