Step | Action | Yes | No |
|---|---|---|---|
DEFINITION: The lock system will not allow the key to be turned to the OFF lock position. | |||
1 | Did you review the ignition lock system description and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that the lock system does not lock. Does the lock system operate normally? | System OK | Go to Step 3 |
3 | Inspect for an incorrect, worn, or damaged key. Is the key incorrect, worn, or damaged? | Go to Step 9 | Go to Step 4 |
4 | Inspect for a faulty lock cylinder. Is the lock cylinder or release button damaged? | Go to Step 10 | Go to Step 5 |
5 | Inspect the shift linkage adjustment. Is the shift linkage adjusted incorrectly? | Go to Step 11 | Go to Step 6 |
6 | Inspect the automatic transmission shift lock control for damage. Is the automatic shift lock control damaged? | Go to Step 12 | Go to Step 7 |
7 | Inspect the ignition switch for damage. Is the ignition switch damaged? | Go to Step 13 | Go to Step 8 |
8 | Inspect the park lock for damage and cycle manual override. Is the park lock damaged? | Go to Step 14 | Go to Step 3 |
9 | Replace the key. Refer to Key and Lock Cylinder Coding. Did you complete the repair? | Go to Step 14 | -- |
10 | Replace the lock cylinder. Refer to Ignition Lock Cylinder Replacement. Did you complete the repair? | Go to Step 14 | -- |
11 | Adjust the shift linkage. Did you complete the repair? | Go to Step 14 | -- |
12 | Replace the automatic transmission shift lock control. Refer to Automatic Transmission Shift Lock Control Actuator Replacement. Did you complete the repair? | Go to Step 14 | -- |
13 | Replace the ignition switch. Refer to Ignition and Start Switch Replacement. Did you complete the repair? | Go to Step 14 | -- |
14 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
