GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Rendezvous - FWD 🢒 HVAC 🢒 HVAC Systems - Automatic 🢒 Inside Air Temperature Sensor Aspirator Replacement

Removal Procedure

    Object Number: 885915 Size: SH
  1. Remove the I/P carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.
  2. Remove the aspirator hose mounting screw.
  3. Disconnect the aspirator hose from the aspirator duct adapter (1).
  4. Remove the aspirator hose from the HVAC module.

Installation Procedure

    Object Number: 885915 Size: SH
  1. Install the aspirator hose to the HVAC module.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the aspirator hose retaining screw.

    3. Tighten
    Tighten the screw 0.9 N·m (8 lb in).

  3. Connect the aspirator hose to the aspirator duct adapter (1).
  4. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.