Transmission Mount Bracket Replacement for Buick Rendezvous - FWD 2007

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation .
3. Remove the left engine splash shield. Refer to Engine Splash Shield Replacement .
4. Use a utility stand with a block of wood in order to support the transaxle.



5. Remove the transaxle mount upper nuts.



6. Remove the transaxle mount bracket bolts.
7. Remove the transaxle mount bracket.

1. Position the transaxle mount bracket.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the transaxle mount bracket bolts.

Tighten
Start with the forward lower bolt and work clockwise to tighten the transaxle mount bracket bolts to 95 N·m (70 lb ft).

3. Remove the utility stand.



4. Install the transaxle mount upper nuts.

Tighten
Tighten the transaxle mount upper nuts to 47 N·m (35 lb ft).

5. Install the left engine splash shield. Refer to Engine Splash Shield Replacement .
6. Install the left front tire and wheel. Refer to Tire and Wheel Removal and Installation .
7. Lower the vehicle.