Door Lock Switch Replacement for Buick Rendezvous - FWD 2007

1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement.
2. Use a small flat-bladed tool to release the clips at the top and the bottom of the door lock switch.
3. Disconnect the electrical connector from the switch.
4. Remove the switch.

1. Install the door lock switch to the trim panel. Press the switch into place until fully seated.
2. Connect the electrical connector to the door lock switch.
3. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement.
4. Test the lock switch for proper operation.