Fog Lamp Switch Replacement for Buick Rendezvous - FWD 2007

1. Remove the instrument panel (I/P) cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.
2. Grasp the fog lamp switch and pull firmly to release the retaining tabs from the I/P carrier.



3. Disconnect the electrical connector from the fog lamp switch.
4. Remove the fog lamp switch.

1. Connect the electrical connector to the fog lamp switch.



2. Position the fog lamp switch to the retainers in the I/P carrier.
3. Install the fog lamp switch to the I/P carrier. Press the switch into place until fully seated.
4. Install the I/P cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.