Headlamp Switch Replacement for Buick Rendezvous - FWD 2007

1. Remove the instrument panel (I/P) cluster trim plate bezel . Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
2. Grasp the headlamp switch and pull firmly to release the retaining tabs from the I/P carrier.



3. Disconnect the electrical connector from the headlamp switch.
4. Remove the headlamp switch.

1. Connect the electrical connector to the headlamp switch.



2. Position the headlamp switch to the retainers in the I/P carrier.
3. Install the headlamp switch to the I/P carrier. Press the switch into place until fully seated.
4. Install the I/P cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .