GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2007 🢒 Rendezvous - FWD 🢒 Body Systems 🢒 Lighting 🢒 Tail Lamp Replacement

Removal Procedure

    Object Number: 755087 Size: SH
  1. Open the liftgate.
  2. Remove the screws from the tail lamp.
  3. Slide the tail lamp rearward in order to disengage it from the retainers on the rear body panel.

    4. Object Number: 761260 Size: SH
  4. Disconnect the electrical connector from the tail lamp wiring harness.

    5. Object Number: 623914 Size: SH
  5. Remove the tail lamp and side marker lamp sockets from the tail lamp, depressing the locking tab and turning counterclockwise.

Installation Procedure

    Object Number: 623914 Size: SH
  1. Install the tail lamp and side marker lamp sockets to the tail lamp, turning clockwise until the locking tab is fully seated.

    2. Object Number: 761260 Size: SH
  2. Connect the tail lamp electrical connector to the wiring harness.

    3. Object Number: 755087 Size: SH
  3. Position the tail lamp retainer slots to the tabs on the rear body panel.
  4. Install the tail lamp to the rear body panel, pressing into place until fully seated.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the tail lamp screws to the tail lamp.

    6. Tighten
    Tighten the tail lamp screws to 2 N·m (18 lb in).

  6. Close the liftgate.