GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2007 🢒 Rendezvous - FWD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rear Upper Garnish Molding Replacement

Removal Procedure

    Object Number: 620962 Size: SH
  1. Remove the rear upper garnish molding by pulling the rear roof garnish molding to release the push-in retainers.

    2. Important: The seat belt escutcheon is part of the seat belt assembly.

  2. Remove the seat belt escutcheon from the rear roof garnish molding using a small flat bladed tool.
  3. Disconnect the electrical connector from the rear cargo lamp.
  4. Remove the rear seat belt from the slot in the rear roof garnish molding.
  5. Remove the rear roof garnish molding from the vehicle.

Installation Procedure

    Object Number: 620962 Size: SH
  1. Install the rear seat belt to the slot in the rear roof garnish molding.
  2. Connect the electrical connector to the rear cargo lamp.

    3. Object Number: 620961 Size: SH
  3. Install the seat belt escutcheon to the rear roof garnish molding.
  4. Install the push-in retainers to the rear roof garnish molding, applying pressure on the molding to secure at all retainer locations.