GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2007 🢒 Rendezvous - FWD 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Fog Lamp Switch Replacement

Removal Procedure

    Object Number: 629226 Size: SH
  1. Remove the instrument panel (I/P) cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.
  2. Grasp the fog lamp switch and pull firmly to release the retaining tabs from the I/P carrier.

    3. Object Number: 629224 Size: SH
  3. Disconnect the electrical connector from the fog lamp switch.
  4. Remove the fog lamp switch.

Installation Procedure

    Object Number: 629224 Size: SH
  1. Connect the electrical connector to the fog lamp switch.

    2. Object Number: 629226 Size: SH
  2. Position the fog lamp switch to the retainers in the I/P carrier.
  3. Install the fog lamp switch to the I/P carrier. Press the switch into place until fully seated.
  4. Install the I/P cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.