For 1990-2009 cars only
Removal Procedure
- Remove the front bucket seat. Refer to Bucket Seat Replacement .
- Remove the inner cushion trim cover. Refer to Front Seat Cushion Inner Trim Panel Replacement .
- Remove the outer cushion trim cover. Refer to Front Seat Cushion Outer Trim Panel Replacement .
- Remove the front seat belt buckle. Refer to the following procedures:
- Disconnect the electrical connectors from the front seat adjuster motors.
- Remove the bolts from the seat adjuster.
- Remove the adjuster from the seat cushion frame.
- Remove the handle from the seat adjuster.
Installation Procedure
- Install the front seat adjuster to the seat cushion frame.
- Install the seat back recliner cable to the recessed space on the right and on the left sides of the seat cushion frame.
- Install the bolts to the front seat adjuster.
- Install the handle to the front seat adjuster.
- Connect the electrical connectors to the front seat adjuster motors.
- Install the front seat belt buckle. Refer to the following procedures:
- Install the inner cushion trim cover. Refer to Front Seat Cushion Inner Trim Panel Replacement .
- Install the outer cushion trim cover. Refer to Front Seat Cushion Outer Trim Panel Replacement .
- Install the bucket seat. Refer to Bucket Seat Replacement .
- If the vehicle is equipped with memory seats, calibrate the seat. Refer to Memory Seat Calibration .
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolts to 43 N·m (32 lb ft).
