GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2007 🢒 Rendezvous - FWD 🢒 Safety and Security 🢒 Supplemental Inflatable Restraints 🢒 Cruise Control Release Switch Replacement

Removal Procedure
  1. Remove the left side instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .

    2. Object Number: 882916 Size: SH
  2. Rotate the cruise control release switch counterclockwise until the travel stop has been reached (approximately 60 degrees).

    3. Object Number: 882912 Size: SH

  3. Remove the cruise control release switch from the retainer.

  4. Disconnect the cruise control release switch electrical connector.

Installation Procedure
  1. Install the cruise control release switch electrical connector.

    2. Object Number: 882912 Size: SH

  2. With the electrical connector index notch at the 10 o'clock position, install the cruise control release switch to the retainer.

    Important: Do NOT move or push the brake pedal.

  3. Slide the switch into the retainer until the plunger is fully depressed into the barrel.

    4. Object Number: 882916 Size: SH
  4. Rotate the cruise control release switch clockwise until the travel stop has been reached (approximately 60 degrees). The electrical connector index notch should now be at the 12 o'clock position.
  5. Ensure that the cruise control system operates properly.
  6. Install the left side instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .