Tools Required

J 37096 Flywheel Holder

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .



2. Remove the torque converter cover. Refer to Torque Converter Cover Replacement .



3. Use the J 37096 in order to rotate the flywheel and access the torque converter bolts.
4. Use the J 37096 to hold the flywheel.



5. Remove the flywheel to torque converter bolts.

1. Install the flywheel to torque converter bolts.

Notice: Refer to Fastener Notice in the Preface section.

2. Use the J 37096 to hold the flywheel.

Tighten
Tighten the bolts to 63 N·m (47 lb ft).




3. Install the torque converter cover. Refer to Torque Converter Cover Replacement .
4. Lower the vehicle.