CAMPAIGN: DEFORMATION OF FRONT AND REAR BUMPER BRACKETS for Buick Riviera 1984

Please make the following corrections to your copies of subject recall campaign bulletin.

VEHICLES INVOLVED

Change starting VIN breakpoint for Electras - Coupes and Sedans, to read:

EH800001

Change starting VIN breakpoint for Electra Estate Wagons to read:

EX400001

LESABRE REAR BUMPER BRACKETS

The LeSabre rear bracket part numbers listed on page 3 and page 5 (Figure 3) of bulletin indicated incorrect location when brackets are installed on a vehicle. Correct location is as follows:

LOCATION PART NUMBER -------- ----------- Right Side 25522503

Left Side 25522502

Some of the vehicles on your campaign vehicle list may have been assembled with a full-width bumper reinforcement (Figure 1 in 84-C-2), and do not require the campaign change. To obtain credit for inspecting a vehicle which does not require brackets, use the following operation:

Other Failure Labor Labor Hours Operation Code Opr. No. Hours (Admin.) --------- ------- -------- ----- -------- Inspect for 96 V2024 .2 Hrs. .1 Hr. Bumper Brackets Only.

The inspection operation is not to be used in conjunction with a replacement operation, as only one applicable operation will be allowed. The replacement operations include sufficient time for inspection.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.