GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1998 🢒 Riviera 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Instrument Panel Outer Trim Cover Replacement - Right Side

Removal Procedure

    Object Number: 282965 Size: SH
  1. Remove the fastener (2) on the bottom of the right side trim panel (1).
  2. Pull outward on the trim panel (1) in order to remove the trim panel (1).

Installation Procedure

    Object Number: 282965 Size: SH
  1. Align the trim panel (1) to the instrument panel (IP).
  2. Push inward in order to fasten the trim panel to the IP.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the fastener (2) to the trim panel.

    4. Tighten
    Tighten the fastener to 1.9 N·m (17 lb in).