Rear Compartment Switch Replacement Buick

1. Remove the drivers door map pocket. Refer to Front Side Door Map Pocket Trim Panel Replacement in Doors.



2. Disconnect the electrical connector from the rear compartment release switch.
3. Push in on the retainers in order to release the rear compartment release switch (1).

Remove the switch.

1. Align the rear compartment release switch (1) to the door trim panel.

Push the switch inward in order to fasten the switch.

2. Connect the electrical connector.
3. Install the map pocket. Refer to Front Side Door Map Pocket Trim Panel Replacement in Doors.