Removal Procedure
- Raise the vehicle. Refer
to
Lifting and Jacking the Vehicle
in General information.
- Bend the EVAP canister vent valve retaining tab.
- Remove the valve from the EVAP canister vent valve bracket.
- Disconnect the EVAP canister vent valve electrical connector.
- Loosen the vent hose clamp and remove the vent hose from the EVAP
vent valve.
- Remove the EVAP canister vent valve from the vehicle.
Installation Procedure
- Connect the vent hose
to the EVAP canister vent valve and tighten the hose clamp.
- Connect the EVAP canister vent valve electrical connector.
- Install the EVAP canister vent valve to the EVAP canister vent
valve bracket.
- Bend the EVAP canister vent valve retaining tab.
- Lower the vehicle.