GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Did you perform the Instrument Cluster Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

2

  1. Turn on the ignition switch.
  2. Connect a scan tool.
  3. Select PCM OUTPUT MENU.

Is the temperature reading on the scan tool the same as the temperature indicted by the temperature gauge?

--

Go to Engine Controls

Go to Step 3

3

Replace the instrument panel cluster. Refer to Instrument Cluster Replacement .

Did you complete the repair?

--

Go to Diagnostic System Check - Instrument Cluster

--