A new Forward Clutch Housing and Thrust Washer. (Refer to Items 624 and 636 Figure 1.) This new Forward Clutch Housing contains a stamped channel which increases forward clutch feed providing a shorter neutral to drive engagement.
The new Forward Clutch Housin and Thrust Washer went into production on November 3, 1987 (Julian Date 344).
Whenever this new Forward Clutch Housing is used in previous model THM 125/125C transaxles, the new Powder Metal Bronze Thrust Washer must be used. The previous Thrust Washer will not fit the new Forward Clutch assembly.
Whenever a new Forward Clutch Housing is ordered, the Powder Metal Thrust Washer is included in the package. This new Thrust Washer can be identified by a dimple on both sides of the inside surface of the washer. (Refer to Figure 1.)
Package No Package Description ---------- ------------------- 8664982 Forward Clutch Housing and Thrust Washer 8664762 New Thrust Washer (for models built after November 3, 1987)
When ordering a Thrust Washer (Powder Metal Bronze) for models built before December 10, 1987 (Julian Date 344) use part number 8652759.
Refer to Service Information on the Forward Clutch Housing contained in the THM 125/125C Unit Repair Section of the Service Manual.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.