CASE TO CASE COVER BOLT REVISED LOCATION

A.CASE TO CASE COVER BOLT LOCATION REVISED BEGINNING LATE APRIL, 1981, THM 125 TRANSMISSIONS WERE BUILT WITH A NEW DESIGN CASE AND CASE COVER. THIS DESIGN CHANGE RELOCATED THE CASE TO CASE COVER BOLTS FROM THE CONVERTER (BELL) HOUSING TO THE CASE COVER AREA. SEE FIGURE 1. THESE TWO BOLTS WILL NOW BE TERMED THE OIL PUMP COVER TO CASE BOLT (HEX HEAD) AND CASE COVER TO CASE BOLT (MODIFIED PAN HEAD). ** SEE BULLETIN FOR ILLUSTRATIONS AND PARTS DETAIL **

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.