CAMBER SPEC. CORRECTION SHOP MANUAL UPDATE

CAMBER SPECIFICATION CORRECTION-1980 AND 1981 CITATION THE CAMBER SPECIFICATION LISTED ON PAGE 3A-3 IN THE 1980 AND 1981 CITATION SHOP MANUALS SHOULD BE CHANGED TO READ: ''+1.0F=.50''.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.