2ND GEAR STARTS 125/125C TRANS MISSION CONTROL VALVE ASSEMBLY

MODELS AFFECTED: 1982 & 1983 CE MODEL ONLY AND ALL 1984 MODEL THM 125/125-C TRANSAXLES

Some 1982, and 1983, CE model only, and early 1984 model THM 125/125-C transaxles may exhibit a second gear start, which is best described as the transaxle starting in second gear range instead of first gear range.

Starting with the serial numbers listed below a new control valve body assembly went into production to correct this second gear start conditiion.

When servicing any 1982 or 1983 CE model only, or early 1984 model THM 125/125-C transaxle for this second gear start condition, replace the control valve body assenbly with the control valve body assenbly listed in the dealership parts manual.

MODEL SERIAL NO. MODEL SERIAL NO. ----- ---------- ----- ----------

CA 1674 PD 2104 CB 91946 PE 42048 CE 47452 PF 13478 CF 4607 PG 36699 CT 3519 PJ 4822 PW 47580

MODEL JULIAN DATE ----- ----------- BF 005 BL 005 OP 005

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.