CAMSHAFT SPROCKET TO CAM TORQUE SPECIFICATIONS

MODELS AFFECTED: 1988 SKYLARKS WITH THE QUAD 4 ENGINE (VIN CODE D)

The cam sprocket to cam bolt torque specification was omitted from the 1988 Skyhawk/Skylark New Product Information Manual (Page 6A7-19, Step 14 and Page 6A7-39).

The correct torque is 50 N.m or 37 ft. lbs.

Please note this specification in your manual.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.