FOLDING REAR SEAT BACK DOOR PANELS PUSH PAST STOP BRKT.

SUBJECT: AM9 SPLIT FOLDING REAR SEAT BACK DOOR PANELS GOING REARWARD PAST STOP BRACKET (REPLACE WITH NEW BRACKET)

MODELS AFFECTED: 1992 SKYLARK

CONDITION:

---------- Owners of some 1992 Skylarks with AM9 split folding rear seat back may comment on the occurrence of pushing the folding door panels back past the stop bracket located on the rear side of the rear seat back collar at the inner upper corners of the door panels.

CAUSE:

------ Length dimension on stop bracket is not adequate.

CORRECTION:

----------- Replace existing stop bracket with new bracket (part #16721075).

1. Remove rear seat cushion and seat back.

2. Remove (3) screws securing stop bracket and replace with new bracket.

3. Reinstall rear seat back and cushion.

Parts are currently available from GMSPO.

WARRANTY INFORMATION:

Labor Operation No.: T1817 Labor Time: .3 Hours

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.