FRT SIDE DOOR ARMREST MOLDING RETENTION (APPLY ADHESIVE)

SUBJECT: FRONT SIDE DOOR ARMREST MOULDING RETENTION (APPLY ADHESIVE)

VEHICLES AFFECTED: 1992-93 "N" MODEL

APPLICATION:

----------- 1992-93 'N" Car Buick Series

CONDITION:

--------- Some owners of 1992-93 Buick "N" cars may comment that the front side door armrest moulding does not stay fully seated in the door trim panel.

CAUSE:

----- Front side door armrest moulding barbs have been damaged and no longer retain the moulding.

CORRECTION:

---------- 1 . Pull the moulding away from the upper trim panel in the affected area.

2. Apply a drop of adhesive, P/N 12345632, or equivalent on the top side of the moulding barbs and reinsert the barbs into the slots.

For vehicles repaired under warranty use:

Labour Time: 0.2 Hour

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.