SOME OWNERS MAY COMMENT THAT THE FUEL FILLER DOOR WILL NOT OPEN.
THE FUEL FILLER CABLE MAY BE FROZEN DUE TO WATER ENTERING INTO HOUSING OF CABLE.
THIS CONDITION CAN BE CORRECTED BY USING THE FOLLOWING PROCEDURE:
1. BRING VEHICLE INTO HEATED AREA TO ALLOW THE FUEL FILLER CABLE TO THAW AND THE FUEL FILLER DOOR TO OPEN.
2. WITH FUEL FILLER DOOR OPEN, SPRAY LOCK DE-ICER INTO CABLE AT THE PLUNGER/LATCH END OF CABLE. MOVE PLUNGER AROUND AND IN TO ALLOW SPRAY TO ENTER CABLE.
3. APPLY A SEMI-SYNTHETIC LUBRICANT (NON-WATER SOLUBLE) TO THE PLUNGER ON THE FUEL FILLER CABLE AND DEPRESS PLUNGER SEVERAL TIMES TO ALLOW LUBRICANT TO ENTER HOUSING OF FUEL FILLER CABLE (THIS WILL ACT AS A BARRIER TO ENTRY OF WATER INTO THE FUEL FILLER CABLE).
FOR VEHICLES REPAIRED UNDER WARRANTY, USE:
LABOR OPERATION NUMBER: R4085 LABOR TIME: 0.2 HR
FIGURES: 00 ATTACHMENTS: 00
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1996 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.