- Inspect the fourth clutch
assembly for the following conditions:
| • | Wear or damage to the steel plates (500, 502) |
| • | Peened splines, flaking, or worn fiber on the fiber plates (501) |
- Inspect the fourth clutch shaft assembly (504) for the following
conditions:
| • | Cut or worn fourth clutch plate splines |
| • | Damage or wear to the fourth clutch shaft bushing |
| • | A damaged bushing journal |
| • | Stripped splines for the input sun gear |
| • | Cracks or damage to the hub or shaft |
- Insert the fourth clutch
shaft (504) into the case through the driven sprocket. The shaft must fully
seat into the input sun gear.
- Insert the drive link lube scoop (608) into the case.
- Insert a steel fourth
clutch plate (502) into the driven sprocket support with the machined side
towards the sprocket.
- Insert the remaining fourth clutch plates, alternating between
fiber plates (501) and steel plates (502).
- The clutch plates should align in the driven sprocket support
as shown.
- Insert the fourth clutch reaction plate (500) onto the driven
sprocket support.
