SMU-SECTION 6A-ENG MECH BALANCE SHAFT

SUBJECT: SERVICE MANUAL UPDATE - SECTION 6A-ENGINE MECHANICAL- BALANCE SHAFT HOLDING TOOL

MODELS: 1997 CHEVROLET CAVALIER, MALIBU 1997 PONTIAC SUNFIRE, GRAND AM 1997 BUICK SKYLARK 1997 OLDSMOBILE ACHIEVA WITH 2.4L ENGINE (VIN T--RPO LD9)

IN THE 1997 SERVICE MANUAL SECTION 6A OR THE ENGINE SECTION, THE BALANCE SHAFT HOLDING TOOL WAS INCORRECTLY SPECIFIED AS J 38122, ON PAGES 6A-131, 132, 134, AND 6A-136. THE CORRECT TOOL NUMBER FOR THE BALANCE SHAFT HOLDING TOOL IS J 41088.

FIGURES: 0 ATTACHMENTS: 0

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.

COPYRIGHT 1997. GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.