Steering Gear Heat Shield Replacement for Buick Terraza Ext. 2005

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .



2. If the vehicle is equipped with all wheel drive, remove the right side engine splash shield in order to access the heat shield. Refer to Engine Splash Shield Replacement .
3. Remove the steering gear heat shield bolts.
4. Remove the steering gear heat shield.

1. Install the steering gear heat shield.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the steering gear heat shield bolts.

Tighten
Tighten the steering gear heat shield bolts to 14 N·m (124 lb in).

3. If the vehicle is equipped with all wheel drive, install the right side engine splash shield. Refer to Engine Splash Shield Replacement .
4. Lower the vehicle.