GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the accessory panel from the left rear quarter trim. Refer to Rear Quarter Trim Panel Replacement - Left Side.
  2. Disconnect the auxiliary blower motor resistor electrical connector.

  3. Object Number: 691782  Size: SH
  4. Remove the auxiliary blower motor resistor screws.
  5. Remove the auxiliary blower motor resistor from the auxiliary HVAC module assembly.

Installation Procedure


    Object Number: 691782  Size: SH
  1. Install the auxiliary blower motor resistor to the auxiliary HVAC module assembly.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the auxiliary blower motor resistor screws.
  4. Tighten
    Tighten the screws to 1.6 N·m (14 lb in).

  5. Connect the auxiliary blower motor resistor electrical connector.
  6. Install the accessory panel from the left rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Left Side.