Tools Required

J 35268-A Camshaft/Front Main Seal Installer

1. Remove the crankshaft drive gear. Refer to Crankshaft Pulley Replacement .



2. Carefully drill a small, shallow, pilot hole into the steel ring of the crankshaft front oil seal.
3. Screw in a self-tapping screw.
4. Use pliers to pull out the crankshaft front oil seal.
5. Clean the sealing surface.

Important: Ensure the crankshaft front oil seal is fully and evenly seated.

1. Tap the crankshaft front oil seal into place using the J 35268-A .
2. Install the crankshaft drive gear. Refer to Crankshaft Pulley Replacement .