GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 CTS 🢒 Engine 🢒 Engine Mechanical - 2.8L (LP1) 🢒 Power Steering Pump Installation

Tools Required

J 25033-C Pulley Installer


    Object Number: 945888 Size: SH

    Important: Follow the procedure sequence in order to prevent drive belt mis-alignment and/or possible damage/distortion to the components.

  1. Place the power steering pump in position to the cylinder block.
  2. Loosely install the power steering side bolts in order to hold the power steering pump in position.
  3. Place the power steering front bracket in position.
  4. Loosely install the power steering front bracket bolts.
  5. Hold the power steering pump firmly against the engine block.

    6. Notice: Refer to Fastener Notice in the Preface section.

  6. Tighten the power steering pump front bracket bolt.

    7. Tighten
    Tighten the power steering pump front bracket bolt to 50 N·m (37 lb ft).

  7. Install the power steering pump side bolts.

    8. Tighten
    Tighten the power steering pump side bolts to 50 N·m (37 lb ft).


    Object Number: 1399847 Size: SH
  8. If removed, install the power steering pump pulley using the J 25033-C .

    9. Object Number: 254752 Size: SH
  9. Ensure that the axial tolerance of the power steering pulley on the power steering pump is within 0.25 mm (0.010 in).