GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 CTS 🢒 Engine 🢒 Engine Controls - 2.8L 🢒 Crankshaft Position Sensor Replacement

Removal Procedure

    Object Number: 887868 Size: SH
  1. Turn the ignition OFF.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Reposition the wiring harness heat shield to obtain access.
  4. Disconnect the crankshaft position (CKP) electrical connector (3).

    5. Object Number: 1311144 Size: SH
  5. Remove the crankshaft sensor bolt.
  6. Remove the crankshaft sensor.

Installation Procedure

    Object Number: 1311144 Size: SH
  1. Install the CPK sensor.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the CPK bolt.

    3. Tighten
    Tighten the CPK bolt to 10 N·m (89 lb in).


    Object Number: 887868 Size: SH
  3. Connect the CKP electrical connector (3).
  4. Install the wiring harness heat shield to the oil level indicator tube.
  5. Lower the vehicle.