Schematic Reference: Interior Lights Schematics

Connector End View Reference: Master Electrical Component List

1

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

1. Close all of the doors.
2. Turn OFF the courtesy lamps.
3. Turn ON the ignition, with the engine OFF.
4. Turn On and OFF the reading lamps.

Do the reading lamps operate properly?

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

Does the courtesy lamp function of the inoperative reading/courtesy lamp operate properly?

Go to Step 4

Go to Courtesy Lamps Inoperative

Test the ground circuit of the inoperative reading/courtesy lamp for a high resistance or an open. Refer to Circuit Testing and Wiring Repairs .

Did you find and correct the condition?

Go to Step 7

Go to Step 5

Inspect for poor connections at the harness connector of the reading/courtesy lamp. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs .

Did you find and correct the condition?

Go to Step 7

Go to Step 6

Replace the inoperative reading/courtesy lamp.

Did you complete the replacement?

Go to Step 7

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2