Rear Integration Body Control Module Replacement Rear Body Control Module

1. Remove the rear shelf. Refer to Rear Shelf Carrier Replacement in Interior Trim.



2. Remove the push pins securing the rear body control module (RBCM) (1) to the electrical carrier assembly.
3. Disconnect the electrical connectors.
4. Remove the RBCM.

1. Install the RBCM (1) to the electrical carrier.
2. Reinstall the push pin fasteners.
3. Reinstall the rear shelf. Refer to Rear Shelf Carrier Replacement in Interior Trim.
4. If installing a replacement RBCM, program the module. Refer to Control Module References for programming and setup information.