GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 CTS 🢒 Body 🢒 Body Rear End 🢒 Rear Compartment Lid Latch Striker Replacement

Removal Procedure
  1. Remove the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement .
  2. Remove the rear fascia. Refer to Rear Bumper Fascia Replacement in Bumpers.

    3. Object Number: 738160 Size: SH
  3. Remove the nuts securing the latch striker to the vehicle.
  4. Remove the rear compartment latch striker.

Installation Procedure

    Object Number: 738160 Size: SH
  1. Position the rear compartment latch striker to the vehicle.
  2. Install the nuts in order to secure the latch striker to the vehicle.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Adjust the rear compartment latch striker as necessary.

    4. Tighten
    Tighten the latch striker fasteners to 9 N·m (80 lb in).

  4. Install the rear fascia. Refer to Rear Bumper Fascia Replacement in Bumpers.
  5. Install the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement .