GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the front fascia. Refer to Front Bumper Fascia Replacement .

  2. Object Number: 802702  Size: SH
  3. Remove the screw (1) retaining the closeout panel (2) to the fascia.
  4. Remove the closeout panel (2) from the fascia.

Installation Procedure


    Object Number: 802702  Size: SH
  1. Position the closeout panel (2) to the fascia.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screw (1) to the closeout panel (2).
  4. Tighten
    Tighten the screw (1) to 3 N·m (27 lb in).

  5. Install the front fascia. Refer to Front Bumper Fascia Replacement .