GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 CTS 🢒 Body 🢒 Exterior Trim 🢒 Rear Wheel Opening Molding Replacement

Removal Procedure

    Object Number: 708026 Size: SH
  1. Remove the push-in retainers (1) that secure the rear wheel opening molding (2) to the inner wheelhouse.
  2. Remove the rear wheel opening molding from the vehicle.

Installation Procedure

    Object Number: 708026 Size: SH
  1. Position the rear wheel opening molding (2) to the pilot holes in the wheelhouse and body.
  2. Install the push-in retainers (1) in order to retain the rear wheel opening molding to the wheelhouse and body.