GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1250841  Size: SH
  1. Turn OFF the ignition.
  2. Remove the center console. Refer to Front Floor Console Replacement in Instrument Panel, Gages, and Console.
  3. Disconnect the yaw rate sensor/lateral accelerometer sensor electrical connector.
  4. Remove the yaw rate sensor/lateral accelerometer sensor mounting nuts (1) from the mounting studs.
  5. Remove the yaw rate sensor/lateral accelerometer sensor from the vehicle.

Installation Procedure

  1. Connect the yaw rate sensor/lateral accelerometer sensor electrical connector.

  2. Object Number: 1250841  Size: SH
  3. Install the yaw rate sensor/lateral accelerometer sensor (2) to the vehicle.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the yaw rate sensor/lateral accelerometer sensor mounting nuts (1) to the mounting studs.
  6. Tighten
    Tighten the yaw rate sensor/lateral accelerometer sensor mounting nuts to 9 N·m (80 lb in).

  7. Install the center console to the vehicle. Refer to Front Floor Console Replacement in Instrument Panel, Gages, and Console.
  8. Perform the System Check-Vehicle. Refer to Diagnostic System Check - Vehicle in Vehicle DTC Information.