Removal Procedure
- Set the parking brake.
- Remove the shift boot from the console trim plate by
lightly prying up on the rear of the shift control boot.
- Lift the shift control boot up over the shift knob.
- Remove the shift knob retaining screw.
- Lift the shift control boot and knob assembly off of
the shift lever.
Installation Procedure
- Install the shift control boot and knob assembly onto
the shift lever.
- Install the shift knob retaining screw.
- Insert the front tabs of the shift control boot into
the console trim plate opening.
- Press the rear of the shift control boot down into the console trim plate
opening.
- Tug lightly to insure the shift control boot is securely attached to the
console trim plate opening.