The DIC gives you the status of many of your vehicle's systems. It is also used to display driver personalization features and warning/status messages. All messages will appear on the navigation screen.
System Controls
To operate the DIC, use the following:
INFO (Information): Use this button to access the Vehicle Information menu that provides the status of various vehicle systems. See "Vehicle Information Menu" later in this section for more information.TUNE/SEL (Tune/Select Knob): Once a menu is displayed, use this knob to scroll through the menu items and/or select them. To scroll through the menu items, turn the knob. Once an item is highlighted, press the knob once to select it.
Press the buttons to the right of the navigation screen when they are next to a menu item or a prompt to select the menu item or acknowledge the prompt. See "Status Menu Item Descriptions" following in this section for more information.
Status of Vehicle Systems
You can view the status of several vehicle systems using the DIC.
Vehicle Information Menu
To access the Vehicle Info menu, press the INFO key. You can also access this menu through the Setup menu. See "Setup Menu" in the Index of your vehicle's owner manual.
* These items can be reset. Each one must be reset individually. For a detailed description of the menu items and how to reset them, see "Vehicle Information Menu Item Descriptions" following.
You can view any of these menu items at any time by selecting them using the TUNE/SEL knob. The currently selected item is displayed at the top of the screen. Only one item can be displayed at a time.
Vehicle Information Menu Items and Descriptions
Outside Air Temperature: If you select this item, the current outside temperature is displayed at the top of the screen. It will be in either degrees Fahrenheit or degrees Celsius depending upon whether the system is set for English or metric units.*Trip Odometer A and B: To access the trip odometer do the following:
- Press the INFO button located on the left side of the screen to access the Vehicle Information menu.
- Scroll to Trip Odometer A or Trip Odometer B using the TUNE/SEL knob.
- Select the menu item by pressing the TUNE/SEL knob once.
- Repeat the steps to view the other trip odometer.
The selected trip odometer (A or B) will display at the top of the screen with the accumulated mileage.
You can reset the selected trip odometer by pressing the reconfigurable button next to Reset. The mileage for that trip odometer will return to zero. Each trip odometer must be reset individually.
Fuel Range: If you select this item, the approximate number of remaining miles or kilometers you can drive without refueling will display. This estimate is based on the current driving conditions and will change if the driving conditions change. For example, if you are driving in traffic making frequent stops, the display may read one number, but if you enter the freeway, the number may change even though you still have the same amount of gas in the gas tank. This is because different driving conditions produce different fuel economies. Generally, freeway driving produces better fuel economy than city driving. If your vehicle is low on fuel, the Low Fuel Level message will display. See "DIC Warnings and Messages" later in this section for more information.*Average Fuel Economy: If you select this item, the approximate average miles per gallon (mpg) or liters per 100 kilometers (L/100 km) is displayed. This number is calculated based on the number of mpg (L/100 km) recorded since the last time this menu item was reset. To reset the Average Fuel Economy, press and hold the reconfigurable key next to the Reset prompt. The display will return to zero.
Instantaneous Fuel Economy: If you select this item, the current fuel economy will display. This number reflects only the fuel economy that the vehicle has right now and will change frequently as driving conditions change. Unlike average fuel economy, this menu item cannot be reset.
*Fuel Used: If you select this item, the number of gallons or liters of fuel used since the last reset of this menu item will display. To reset Fuel Used, press and hold the reconfigurable key next to the Reset prompt. The display will return to zero.
*Average Vehicle Speed: If you select this item, the average speed of the vehicle will display in miles per hour (mph) or kilometers per hour (km/h). This average is calculated based on the various vehicle speeds recorded since the last reset of this menu item. To reset the Average Vehicle Speed, press and hold the reconfigurable key next to the Reset prompt. The display will return to zero.
*Timer: If you select this item, a timing feature will display. The timer functions like a stopwatch in that you can record the time it takes to travel from one point to another. To use the timer, you must first turn it on. To turn on the timer, press the reconfigurable key next to the On/Off menu item. The display for both systems will read 00:00:00 TIMER ON and begin counting. Press the key(s) again to turn the timer off. When the timer is off, the timer value and TIMER OFF will display. The timing feature will stop. To reset the timer, press and hold the reconfigurable key next to the Reset prompt. The display will return to zero.
Battery Voltage: If you select this item, the current battery voltage will display. If the voltage is in the normal range, the display will have OK after it. For example, the display may read 13.2 Battery Volts OK. If there is a problem with the battery charging system, there are four possible DIC messages that may display. See "DIC Warnings and Messages" later in this section for more information.
*Engine Oil Life: If you select this item, the percentage of remaining oil life will display. If you see 99% Oil Life on the display, that means that 99% of the current oil life remains. When the oil life is depleted, the Change Engine Oil message will appear on the display. In addition to the Engine Oil Life System monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule. See "DIC Warnings and Messages" later in this section and "Maintenance Schedule" in the Index of your vehicle's owner manual. When you reset the Change Engine Oil message by clearing it from the display, you still must reset the engine oil life monitor separately.
To reset the oil life indicator, use the following steps:
- Turn the system on by pressing the PWR/VOL knob once.
- Press the INFO key to access the Vehicle Info (Information) menu.
- Turn the TUNE/SEL knob until Engine Oil Life is highlighted. Press the knob once to select it.
- Once XXX% Engine Oil Life is displayed, press the reconfigurable button next to the Reset prompt.
- Turn the key to OFF.
The percentage will return to 100, and the oil life indicator will be reset. Repeat the steps if the percentage does not return to 100.
If the change engine oil message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.
*Transmission Fluid Life (Automatic Transmission): If you select this item, the percentage of remaining transmission fluid life will display. If you see 99% Trans Fluid Life on the display, that means that 99% of the current transmission fluid life remains. When the transmission fluid life is depleted, the Change Transmission Fluid message will appear on the display. You should change the transmission fluid as soon as possible within 200 miles (322 km). Be sure to keep a written record of the mileage and date of the fluid change so you will have it for future reference. When you reset the Change Transmission Fluid message by clearing it from the display, you still must reset the transmission fluid life monitor separately.To reset the transmission fluid life indicator, use the following steps:
- Turn the system on by pressing the PWR/VOL knob once.
- Press the INFO key to access the Vehicle Info (Information) menu.
- Turn the TUNE/SEL knob until Trans Fluid Life is highlighted. Press the knob once to select it.
- Once XXX% Trans Fluid Life is displayed, press the reconfigurable button next to the Reset prompt .
- Repeat the steps if the percentage does not return to 100.
The percentage will return to 100, and the transmission fluid life indicator will be reset.
DIC Warnings and Messages
These messages will appear if there is a problem sensed in one of your vehicle's systems.
You must acknowledge a message to clear it from the screen for further use. To clear a message, press the reconfigurable key next to the OK prompt.
Be sure to take any message that appears on the screen seriously and remember that clearing the message will only make the message disappear, not the problem.
Battery Not Charging
This symbol appears with the Battery Not Charging message.
When this message appears on the display, there is a problem with the generator and battery charging systems. Have the electrical system checked by your dealer as soon as possible.
Battery Saver Active
This symbol appears with the Battery Saver Active message.
This message appears when the system detects that the battery voltage is dropping beyond a reasonable level. The battery saver system will start reducing certain features of the vehicle that you may not be able to notice. At the point that the features are disabled, this message is displayed. It means that the vehicle is trying to save the charge in the battery.
Turn off all unnecessary accessories to allow the battery to recharge.
The normal battery voltage range is 11.5 to 15.5 volts. You can monitor battery voltage on the DIC by selecting Battery Voltage from the Vehicle Information menu.
Battery Voltage High
This symbol appears with the Battery Voltage High message.
This message indicates that the electrical charging system is overcharging the battery. When the system detects that the battery voltage is above approximately 16 volts, this message will be displayed.
To reduce the charging overload, use the vehicle's accessories. Turn on the exterior lamps and radio, set the climate control on AUTO and the fan speed on the highest setting, and turn the rear window defogger on.
The normal battery voltage range is 11.5 to 15.5 volts when the engine is running. You can monitor battery voltage on the DIC by selecting Battery Voltage from the Vehicle Information menu.
Battery Voltage Low
This symbol appears with the Battery Voltage Low message.
This message will appear when the electrical system is charging less than 10 volts or if the battery has been drained.
If this message appears immediately after starting the engine, it is possible that the generator can still recharge the battery. The battery should recharge while driving but may take a few hours to do so. Consider using an auxiliary charger to boost the battery after returning home or to a final destination. Be sure to follow the manufacturer's instructions.
If this message appears while driving or after starting your vehicle and stays on, have it checked by your dealer immediately to determine the cause of this problem.
To help the generator recharge the battery quickly, you can reduce the load on the electrical system by turning off the accessories.
The normal battery voltage range is 11.5 to 15.5 volts. You can monitor battery voltage on the DIC by selecting Battery Voltage from the Vehicle Information menu.
Buckle Passenger
This symbol appears with the Buckle Passenger message.
This message reminds you to buckle the passenger's seat belt.
This message will display and a chime will sound when the ignition is on, the driver's seat belt is buckled, the passenger's seat belt is unbuckled with the passenger airbag enabled and the vehicle is in motion. You should have the passenger buckle their seat belt.
The reminder will be repeated if the ignition is on, the vehicle is in motion, the driver is unbuckled and the passenger is still unbuckled and the passenger airbag is enabled. If the passenger's seat belt is already buckled, this message and chime will not come on.
Buckle Seat Belt
This symbol appears with the Buckle Seat Belt message.
This message reminds you to buckle the driver's seat belt.
This message will display and a chime will sound when the ignition is on, the driver's seat belt is unbuckled and the vehicle is in motion. You should buckle your seat belt.
If the driver remains unbuckled when the ignition is on and the vehicle is in motion, the reminder will be repeated. If the driver's seat belt is already buckled, this message and chime will not come on.
This message is an additional reminder to the Safety Belt Reminder Light in the instrument panel cluster. See "Safety Belt Reminder Light" in your vehicle's owner manual.
Change Engine Oil
This symbol appears with the Change Engine Oil message.
This message indicates that the life of the engine oil has expired and it should be changed and that your vehicle is due for service. See "Engine Oil" and "Maintenance Schedule" in your vehicle's owner manual for more information.
When you reset the Change Engine Oil message by clearing it from the display, you still must reset the engine oil life monitor separately. For more information on resetting the engine oil life monitor, see "Vehicle Information Menu Item Descriptions" previously in this section.
Change Trans Fluid (Automatic Transmission)
This symbol appears with the Change Trans Fluid message.
This message indicates that the life of the transmission fluid has expired and it should be changed within 200 miles. See "Automatic Transmission Fluid" and "Maintenance Schedule" in your vehicle's owner manual for the proper fluid and change intervals.
When you reset the Change Trans Fluid message by clearing it from the display, you still must reset the transmission fluid life monitor separately. For more information on resetting the transmission fluid life monitor, see "Vehicle Information Menu Item Descriptions" previously in this section.
Check Brake Fluid
This symbol appears with the Check Brake Fluid message.
This message will display if the ignition is in ON to inform the driver that the brake fluid level is low. Have the brake system serviced by your dealer as soon as possible. See "Brake System Warning Light" in your vehicle's owner manual.
Check Coolant Level
This symbol appears with the Check Coolant Level message.
This message will appear when there is a low level of engine coolant. Have the cooling system serviced by your dealer as soon as possible. See "Engine Coolant" in your vehicle's owner manual.
Check Gas Cap
This symbol appears with the Check Gas Cap message.
When this message appears on the display, the gas cap has not been fully tightened. You should recheck the gas cap to ensure that it is on and tightened properly. See "Malfunction Indicator Lamp" in your vehicle's owner manual.
Check Washer Fluid
This symbol appears with the Check Washer Fluid message.
When this message appears on the display, it means that your vehicle is low on windshield washer fluid. You should refill the tank as soon as possible. See "Windshield Washer Fluid" in your vehicle's owner manual.
Competitive Driving (CTS-V)
When competitive driving mode is turned on with the traction control button, this message will be displayed on the DIC. The TC light will be on when the competitive driving mode is on. The traction control system will not operate while in competitive driving mode. You should adjust your driving accordingly. See the CTS-V portion of "Traction Control System (TCS)" in your vehicle's owner manual.
Driver Door Ajar
This symbol appears with the Driver Door Ajar message.
When this message appears on the display, it means that the driver's door was not closed completely. You should make sure that the driver's door is closed completely.
Engine Coolant Hot - Idle Engine
This symbol appears with the Engine Coolant Hot - Idle Engine message.
This message will appear when the engine coolant temperature is too hot. Stop and allow the vehicle to idle until it cools down.
Notice: If you drive your vehicle while the engine is overheating, severe engine damage may occur. If an overheat warning appears on the instrument panel cluster and/or DIC, stop the vehicle as soon as possible. Do not increase the engine speed above normal idling speed. See "Engine Overheating" in your vehicle's owner manual for more information.
Engine Coolant Hot - AC (Air Conditioning) Off
This symbol appears with the Engine Hot - AC Off message.
This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning compressor is automatically turned off. When the coolant temperature returns to normal, the air conditioning compressor will turn back on. You can continue to drive your vehicle.
If this message continues to appear, have the system repaired by your dealer as soon as possible to avoid damage to the engine or transmission.
Engine Overheated - Stop Engine
This symbol appears with the Engine Overheated - Stop Engine message.
This message will appear when the engine has overheated. Stop the vehicle and turn the engine off immediately to avoid severe engine damage. A chime will also sound when this message is displayed. See "Engine Overheating" in your vehicle's owner manual.
Notice: If you drive your vehicle while the engine is overheating, severe engine damage may occur. If an overheat warning appears on the instrument panel cluster and/or DIC, stop the vehicle as soon as possible. Do not increase the engine speed above normal idling speed. See "Engine Overheating" in your vehicle's owner manual for more information.
Engine Power Reduced
This symbol appears with the Engine Power Reduced message.
This message informs you that the vehicle is reducing engine power to try to protect the engine or transmission from damage due to extreme operating conditions. This also can affect the vehicle's ability to accelerate.
Fuel Level Low
This symbol appears with the Fuel Level Low message.
When this message appears on the display, it means that your vehicle is low on fuel. You should refill the tank as soon as possible. A single chime will sound when this message is displayed.
Headlamps Suggested
This symbol appears with the Headlamps Suggested message.
This message will appear when the amount of available light outside the vehicle is low and the exterior lamp control is off. This message informs the driver that turning on the exterior lamps is recommended even though the DRL are still illuminated and it has become dark enough outside to require the headlamps and/or other exterior lamps.
This message will also appear when the windshield wipers have been on for more than six seconds and the exterior lamp control is off or in the parking lamp position.
Ice Possible
This symbol appears with the Ice Possible message.
This message appears when the outside temperature is cold enough to create icy road conditions.
Left Rear Door Ajar
This symbol appears with the Left Rear Door Ajar message.
When this message appears on the display, it means that the driver's side rear door was not closed completely. You should make sure that the door is closed completely.
Oil Pressure Low - Stop Engine
This symbol appears with the Oil Pressure Low - Stop Engine message. A multiple chime will sound when this message is displayed.
Notice: If you drive your vehicle while the engine oil pressure is low, severe engine damage may occur. If a low oil pressure warning appears on the instrument panel cluster and/or DIC, stop the vehicle as soon as possible. Do not drive the vehicle until the cause of the low oil pressure is corrected. See "Engine Oil" in your vehicle's owner manual for more information.
Passenger Door Ajar
This symbol appears with the Passenger Door Ajar message.
When this message appears on the display, it means that the passenger's side front door was not closed completely. You should make sure that the door is closed completely.
Personalization Off/Driver Identification
This symbol appears with the Personalization Off message.
When this message appears, the personalization features previously stored are turned off. If you want your customized settings to be automatically recalled when you use the remote keyless entry transmitter or when you remove the key from the ignition, you must enable them in the DIC.
This message is also used to identify the driver (1, 2, or 3) on the navigation display.
Right Rear Door Ajar
This symbol appears with the Right Rear Door Ajar message.
When this message appears on the display, it means that the passenger's side rear door was not closed completely. You should check to make sure that the door is closed completely.
Service AC (Air Conditioning) System
This symbol appears with the Service AC System message.
This message appears when the electronic sensors that control the air conditioning and heating systems are no longer working. Have the climate control system serviced by your dealer if you notice a drop in heating and air conditioning efficiency.
Service Air Bag
This symbol appears with the Service Air Bag message.
There is a problem with the airbag system when this message appears. Have your vehicle serviced by your dealer immediately. See "Airbag System" in your vehicle's owner manual.
Service Charging System
This symbol appears with the Service Charging System message.
This message will display when a problem with the charging system has been detected. Have your vehicle serviced by your dealer.
Service Electrical System
This symbol appears with the Service Electrical System message.
This message will display if an electrical problem has occurred within the Powertrain Control Module (PCM) or the ignition switch. Have your vehicle serviced by your dealer.
Service Fuel System
This symbol appears with the Service Fuel System message.
The Powertrain Control Module (PCM) has detected a problem within the fuel system when this message appears. Have your vehicle serviced by your dealer.
Service Idle Control
This symbol appears with the Service Idle Control message.
A problem with the idle control has occurred when this message displays. Have your vehicle serviced by your dealer.
Service Stability System Message
This symbol appears with the Service Stability System message.
Your vehicle may be equipped with a vehicle stability enhancement system called Stabilitrak®.
See "Stabilitrak® System" in your vehicle's owner manual. The Service Stability System message will be displayed if there has been a problem detected with Stabilitrak®.
If the Service Stability System message comes on while you are driving, pull off the road as soon as possible and stop carefully. Try resetting the system by turning the ignition off then back on. If the Service Stability System message still stays on or comes back on again while you are driving, your vehicle needs service. Have the Stabilitrak® System inspected by your dealer as soon as possible.
Stability System Engaged Message
This symbol appears with the Stability System Engaged message.
The Stability System Engaged message will be displayed any time Stabilitrak®, if equipped, is actively assisting you with directional control of the vehicle. Slippery road conditions may exist when this message is displayed, so adjust your driving accordingly. This message may stay on for a few seconds after Stabilitrak® stops assisting you with directional control of the vehicle.
Stability System Off Message
This symbol appears with the Stability System Off message.
The Stability System Off message will be displayed any time you turn off Stabilitrak®, if equipped, using the TC (traction control) on/off button. See "Stabilitrak® System" in your vehicle's owner manual. When this message has been displayed, Stabilitrak® is no longer available to assist you with directional control of the vehicle. Adjust your driving accordingly.
Stability System Ready Message
This symbol appears with the Stability System Ready message.
The Stability System Ready message will be displayed any time you turn back on Stabilitrak®, if equipped, using the TC (traction control) on/off button. See "Stabilitrak® System" in your vehicle's owner manual. When this message has been displayed, Stabilitrak® is ready to assist you with directional control of the vehicle if needed.
Service Steering System
This symbol appears with the Service Steering System message.
Your vehicle may be equipped with a speed variable assist steering system. See "Steering" in your vehicle's owner manual.
The Service Steering System message will be displayed if a problem is detected with the speed variable assist steering system. When this message is displayed, you may notice that the effort required to steer the vehicle increases or feels "heavier," but you will still be able to steer the vehicle.
Service Theft System
This symbol appears with the Service Theft System message.
This message means there is a problem with the Immobilizer. See "Immobilizer" in your vehicle's owner manual. A fault has been detected in the system which means that the system is disabled and is not protecting the vehicle. The vehicle usually restarts, however, you may want to take your vehicle to your dealer before turning off the engine.
Service Transmission
This symbol appears with the Service Transmission message.
There is a problem with the transmission of your vehicle. Have your vehicle serviced by your dealer.
Service Vehicle Soon
This symbol appears with the Service Vehicle Soon message.
This message is displayed when a non-emissions related powertrain malfunction occurs. Have your vehicle serviced by your dealer as soon as possible.
Starting Disabled - Remove Key
This symbol appears with the Starting Disabled - Remove Key message.
This message will appear when the vehicle theft-deterrent system detects that an improper ignition key is being used to try to start the vehicle. Check the ignition key for damage. If it is damaged, it may need to be replaced. If it is not damaged, remove the key and try to start the vehicle again. If it still does not start, try another ignition key or have your vehicle serviced by your dealer.
Starting Disabled - Throttle Problem
This symbol appears with the Starting Disabled - Throttle Problem message.
This message appears when your vehicle's throttle system is not functioning properly. Have your vehicle serviced by your dealer.
Theft Attempted
This symbol appears with the Theft Attempted message.
This message is displayed if the content theft-deterrent system has detected a break-in attempt while you were away from your vehicle.
Top Speed - Fuel Cut Off
This symbol appears with the Top Speed - Fuel Cut Off message.
This message will appear when the Engine Control Module (ECM) detects that the maximum speed for your vehicle has been reached. Your vehicle's top speed is based on the top speed rating of the tires. This ensures that your vehicle stays in a safe operating range for the tires.
Traction Engaged
This symbol appears with the Traction Engaged message.
This message will appear when the traction control system is actively limiting wheel spin. Slippery road conditions may exist if this message is displayed, so adjust your driving accordingly. The message will stay on for a few seconds after the traction control system stops limiting wheel spin. See "Traction Control System (TCS)" in your vehicle's owner manual.
Trans (Transmission) Hot - Idle Engine
This symbol appears with the Trans Hot - Idle Engine message.
This message indicates that the transmission fluid in your vehicle is too hot. Stop the vehicle and allow it to idle until the transmission cools down or until this message is removed.
Trunk Open
This symbol appears with the Trunk Open message.
When this message appears on the display, it means that the trunk lid of your vehicle was not closed completely. You should make sure that the trunk lid is closed completely.
Turn Signal On
This symbol appears with the Turn Signal On message.
If you drive your vehicle for more than about 1 mile (1.6 km) with a turn signal on, this message will appear as a reminder to turn off the turn signal. A multiple chime will sound when this message is displayed.
