Info - Seat Belt Stop Button Kits Available
| Subject: | Seat Belt Stop Button Kits Available |
| Models: | 2003-2007 Cadillac CTS, STS |
| 2004-2007 Cadillac SRX, XLR |
| 2006-2007 Cadillac DTS |
This bulletin is being revised to add additional models, model years and part numbers. Please discard Corporate Bulletin Number 04-09-40-002 (Section 09 -- Restraints).
Recently entire seat belt assemblies from the above listed vehicles were returned to the Warranty Parts Center (WPC) for detachment of the seat belt stop button.
The purpose of this bulletin is to advise dealers that replacement of the entire seat belt assembly is NOT required if a stop button becomes broken or missing. A service kit for the Seat Belt Latch Plate Stop (button) is now available from GMSPO.
Stop Button Installation
Do This | Don't Do This |
|---|---|
Install a new seat belt stop button. | Do not replace the entire seat belt retractor assembly. |
- Position the seat belt latch plate above the seat belt button hole.
- On the front side of the seat belt, insert the male button half into the existing hole.
- On the opposite side of the seat belt, position the mating button half.
- Apply pressure to both button halves to engage.
Parts Information
Part Number | Description |
|---|---|
12453515 | Stop Kit, Belt Latch (Graphite) |
12453517 | Stop Kit, Belt Latch (Neutral) |
12475408 | Stop Kit, Belt Latch (Pewter) |
19121445 | Stop Kit, Belt Latch (Cashmere) |
19121446 | Stop Kit, Belt Latch (Ebony) |
19121447 | Stop Kit, Belt Latch (Shale) |
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
|---|---|---|
C9704* | Stop Button, Seat Belt - Install | 0.2 hr |
*This is a unique labor operation for bulletin use only. It will not be published in the Labor Time Guide. | ||
