GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 CTS 🢒 Engine 🢒 Engine Controls and Fuel - 2.8L 🢒 Throttle Body Assembly Replacement

Removal Procedure
  1. Turn the ignition OFF.
  2. Remove the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .

    3. Notice: Refer to Disengaging Connectors Notice in the Preface section.


    Object Number: 945417 Size: SH
  3. Remove the throttle body electrical connector.

    4. Object Number: 1285256 Size: SH
  4. Unlock and reposition the wiring harness conduit.

    5. Object Number: 1285255 Size: SH
  5. Remove the throttle body bolts.
  6. Remove the throttle body and gasket.

Installation Procedure

    Object Number: 1285255 Size: SH
  1. Carefully clean the throttle body mounting surfaces of any gasket and/or seal material.
  2. Install the throttle body and NEW gasket.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the throttle body bolts.

    4. Tighten
    Tighten the throttle body bolts to 10 N·m (89 lb in).


    Object Number: 1285256 Size: SH
  4. Install the wiring harness conduit.

    5. Object Number: 945417 Size: SH
  5. Install the throttle body electrical connector.
  6. Install the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .
  7. Perform the idle learn procedure. Refer to Idle Learn .
  8. Use the scan tool to clear all DTCs.