Removal Procedure
- Turn the ignition OFF.
- Remove the positive crankcase ventilation (PCV) hose from the air cleaner duct resonator.
- Loosen the air cleaner duct clamps.
- Remove the air cleaner duct.
Installation Procedure
- Install the air cleaner intake duct.
- Install the PCV hose to the intake duct resonator.
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the air cleaner duct clamps.
Tighten
• | Tighten the air cleaner duct clamp at the mass air flow (MAF) sensor to 4 N·m (35 lb in). |
• | Tighten the air cleaner duct clamp at the throttle body to 7 N·m (35 lb in). |