GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 CTS 🢒 Engine 🢒 Engine Cooling 🢒 Heater Core Replacement

Removal Procedure
  1. Remove the HVAC module. Refer to HVAC Module Assembly Replacement .
  2. Remove the heater hose bracket screw.

    3. Object Number: 756365 Size: SH
  3. Remove the heater hose bracket (1).

    4. Object Number: 756369 Size: SH
  4. Slide the heater core out of the HVAC module.

Installation Procedure

    Object Number: 756369 Size: SH
  1. Slide the heater core into the HVAC module.

    2. Object Number: 756365 Size: SH
  2. Install the heater hose bracket (1).

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the heater hose bracket screw.

    4. Tighten
    Tighten the screws to 1 N·m (9 lb in).

  4. Install the HVAC module. Refer to HVAC Module Assembly Replacement .