GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the center I/P air vents. Refer to Instrument Panel Center Air Outlet Deflector Replacement .
  2. Remove the HVAC programer/ashtray assembly. Refer to HVAC Control Module Replacement .

  3. Object Number: 700905  Size: SH
  4. Remove the four 10 mm screws securing the radio to the I/P retainer.
  5. Pull out the radio assembly.
  6. Disconnect the electrical connectors.
  7. Remove the radio from the vehicle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 700905  Size: SH
  1. Connect the electrical connectors.
  2. Install the radio assembly to the I/P retainer.
  3. Tighten
    Tighten the screws to 9 N·m (80 lb in).

  4. Install the HVAC programer/ashtray assembly. Refer to HVAC Control Module Replacement .
  5. Install the center I/P air vents. Refer to Instrument Panel Center Air Outlet Deflector Replacement .
  6. Reprogram the radio. Refer to Control Module References for programming and setup information.