GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 CTS 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Instrument Cluster Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) cluster trim cover. Refer to Instrument Cluster Trim Panel Replacement .

    2. Object Number: 700900 Size: SH
  2. Remove the screws (2) securing the cluster to the I/P.

    3. Object Number: 717265 Size: SH
  3. Install a small flat bladed tool (1) between the I/P cluster and the I/P.
  4. Pry up on the I/P in order to release the retainers on the cluster.
  5. Pull out on the cluster and disconnect the electrical connectors.

Installation Procedure

    Object Number: 700900 Size: SH
  1. Position the cluster on the I/P.
  2. Connect the electrical connectors (1) on the back of the cluster.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Push the cluster into the I/P in order to lock in the cluster retainers.
  4. Install the fasteners (2) in order to secure the cluster to the I/P.

    5. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).

  5. Refer to Control Module References for programming and setup information.