GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 CTS 🢒 Suspension 🢒 Front Suspension 🢒 Front Wheel Bearing and Hub Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the brake rotor. Refer to Front Brake Rotor Replacement .

    4. Object Number: 750896 Size: SH
  4. Disconnect the ABS electrical connector.
  5. Remove the electrical connector from the splash shield.

    6. Object Number: 809008 Size: SH
  6. Remove the wheel bearing/hub mounting bolts.
  7. Remove the wheel bearing/hub.

Installation Procedure

    Object Number: 809008 Size: SH
  1. Install the wheel bearing/hub.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the wheel bearing/hub bolts.

    3. Tighten
    Tighten the bolts to 135 N·m (100 lb ft).


    Object Number: 750896 Size: SH
  3. Connect the ABS electrical connector.
  4. Install the brake rotor. Refer to Front Brake Rotor Replacement .
  5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  6. Lower the vehicle.