Removal Procedure
- Remove the rear compartment applique. Refer to Rear Compartment Lid Applique Replacement.
- Remove the fog lamp bulb socket from the applique assembly by pressing the tab (1) and twisting the socket counterclockwise and pulling it out.
- Remove the fog lamp bulb from the socket.
Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly
could cause it to shatter into flying glass fragments. To help avoid personal
injury:
• Turn off the lamp switch and allow the bulb to cool before changing
the bulb. • Leave the lamp switch OFF until the bulb change is complete. • Always wear eye protection when changing a halogen bulb. • Handle the bulb only by its base. Avoid touching the glass. • Keep dirt and moisture off the bulb. • Properly dispose of the used bulb. • Keep halogen bulbs out of the reach of children.
Installation Procedure
- Install the fog lamp bulb into the socket.
- Install the fog lamp bulb socket into the applique assembly (1) by inserting and twisting the socket clockwise.
- Connect the electrical connector.
- Install the rear compartment applique. Refer to Rear Compartment Lid Applique Replacement.
Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly
could cause it to shatter into flying glass fragments. To help avoid personal
injury:
• Turn off the lamp switch and allow the bulb to cool before changing
the bulb. • Leave the lamp switch OFF until the bulb change is complete. • Always wear eye protection when changing a halogen bulb. • Handle the bulb only by its base. Avoid touching the glass. • Keep dirt and moisture off the bulb. • Properly dispose of the used bulb. • Keep halogen bulbs out of the reach of children.
