GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1334095  Size: SH
  1. Open the rear compartment.
  2. Remove the rear compartment lid applique. Refer to Rear Compartment Lid Applique Replacement.
  3. Disconnect the high mounted stop lamp connector from the wiring harness.
  4. Remove the fasteners securing the high mounted stop lamp to the rear compartment lid applique.
  5. Remove the high mounted stop lamp from the rear compartment lid applique and place it face down on a clean protective surface.

Installation Procedure


    Object Number: 1334095  Size: SH
  1. Install the high mount stop lamp to the rear compartment lid applique.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the fasteners in order to secure the high mounted stop lamp to the rear compartment lid applique.
  4. Tighten
    Tighten the high mounted stop lamp fasteners to 6 N·m (53 lb in).

  5. Connect the high mount stop lamp electrical connector.
  6. Install the rear compartment lid applique to the rear compartment lid. Refer to Rear Compartment Lid Applique Replacement.
  7. Close the rear compartment.